Explore our top passive components, optical transceivers, and termination systems engineered for carrier-grade applications.
The 10 Gigabit Small Form-factor Pluggable Plus (10G SFP+) transceiver represents a pivotal technology in the landscape of high-speed data transmission. Operating as the direct evolution of the standard SFP form factor, 10G SFP+ modules support data rates up to 11.1 Gbps while maintaining a compact footprint. This spatial efficiency allows system integrators and IT architects to maximize port density on switch panels, reducing the overall footprint of datacenter architectures.
Unlike historical, larger modules like XENPAK or X2, the 10G SFP+ moves key processing elements—such as clock and data recovery (CDR), electronic dispersion compensation (EDC), and serialization/deserialization (SerDes)—outside the transceiver module, onto the host board interface. This minimalist architecture design significantly reduces power dissipation, thermal load, and manufacture costs per port, making it the bedrock interface configuration for enterprise campus backbones and telecommunication distribution lines worldwide.
Kocent Optec Limited designs, calibrates, and verifies its complete lineup of active optical solutions to comply with international Multi-Source Agreement (MSA) standards (SFF-8431, SFF-8432, SFF-8472). These protocols specify physical dimensions, electrical interfaces, and software diagnostics registries, guaranteeing plug-and-play interoperability across global routing systems.
Review the technical parameters of various 10G SFP+ form factors customized by Kocent Optec to ensure high signal integrity.
| Module Type | Wavelength (nm) | Fiber Type | Max Reach | Connector Type | Laser Source / Receiver |
|---|---|---|---|---|---|
| 10G SFP+ SR | 850nm | Multimode (OM3/OM4) | 300m / 400m | Duplex LC | VCSEL / PIN |
| 10G SFP+ LR | 1310nm | Singlemode (OS2) | 10km | Duplex LC | DFB / PIN |
| 10G SFP+ ER | 1550nm | Singlemode (OS2) | 40km | Duplex LC | EML / PIN |
| 10G SFP+ ZR | 1550nm | Singlemode (OS2) | 80km | Duplex LC | EML / APD |
| 10G SFP+ BiDi | Tx1270 / Rx1330 (or vice versa) | Singlemode (OS2 Simplex) | 10km - 80km | Simplex LC | DFB / APD or PIN |
Technical sourcing teams require more than just a low price; they require system reliability, hardware safety, and seamless vendor integration.
Modern enterprises operate heterogeneous hardware ecosystems featuring platforms from Cisco, Juniper, Arista, Huawei, and HPE. Our 10G SFP+ modules are custom-coded, allowing them to pass host-check validation policies effortlessly. This ensures 100% operational compatibility without voiding original equipment manufacturer warranties.
By consuming under 1.0W per port on average, Kocent Optec's 10G SFP+ transceivers reduce datacenter operating costs. Over thousands of deployed ports, this lower thermal load reduces HVAC load demands, which lowers the Total Cost of Ownership (TCO) and extends the operational lifetime of core network appliances.
Our transceivers feature integrated Digital Diagnostics Monitoring (DDM) according to SFF-8472. Network administrators can monitor transmit/receive optical power, laser bias current, internal module temperature, and supply voltage in real-time, preventing network failures before they manifest.
Established in 2012 in Hong Kong with robust factories in mainland China, Kocent Optec Limited leverages the world's most comprehensive optical telecommunications supply chain. This allows us to secure raw materials and components, such as high-grade laser diodes (VCSEL, DFB, EML), PIN/APD photodetectors, and micro-optics, at highly competitive rates.
Strict Quality Assurance Standards: Our manufacturing facility is governed by ISO 9001:2015 methodologies. Every 10G SFP+ module undergoes automated optical testing, eye diagram measurement, bit error rate (BER) checks, and thermal stress conditioning to ensure stability under harsh operating environments. 100% of our products are inspected and calibrated prior to shipping, keeping customer return rates below 0.05%.
Mass Customization Capabilities: With our automated testing systems and coding rigs, we quickly customize firmware to match specific software requirements. Whether you require standard EEPROM parameters or custom coding solutions to match complex enterprise switch setups, our engineering teams can provide fast turnarounds.
Deploying networking equipment globally requires adherence to strict regulatory environments and regional safety codes. Kocent Optec prioritizes compliance, validating that all optical fiber transceivers and active elements conform to the following standards:
Our localized support network ensures prompt technical assistance. With logistics hubs, fast-response FAE (Field Application Engineering) support, and regional distributor partnerships, we provide expert assistance for global deployments. From remote diagnostics and custom firmware configuration to simplified Return Merchandise Authorization (RMA) workflows, we support your network operations team round-the-clock.
From standard 10G networks to multi-gigabit hybrid cloud nodes, discover where Kocent Optec technologies are deployed.
In high-density datacenters, 10G SFP+ modules are used for Top-of-Rack (ToR) to Leaf switch uplinks. Their low power footprint and minimal latency profile support fast data transfers across virtualized compute clusters.
As telecom operators deploy 5G, 10G and 25G SFP modules are required at remote radio heads (RRH) and baseband units (BBU). Industrial-temperature modules operate reliably in outdoor environments (-40°C to +85°C).
While 10G remains a highly deployed speed class globally, networks are transitioning toward 25G (SFP28), 100G (QSFP28), and 400G architectures. Kocent Optec offers upgrade pathways with dual-rate transceivers, helping networks scale smoothly.
Your Global Partner in Advanced Fiber Optic Connection Solutions
Kocent Optec Limited was established in 2012 in Hong Kong as a hi-tech communication enterprise. We have grown to become one of China's leading manufacturers of fiber optic termination products and end-to-end active/passive networking solutions. We develop, manufacture, and distribute a wide range of fiber optic solutions, optimized for telecommunication networks, enterprise networks, and cloud datacenters.
By leveraging our extensive manufacturing experience and production capacity, we help our customers improve network performance and stay competitive. We build collaborative partnerships, offering custom fiber optic connection solutions designed to help you meet your networking goals.
Over the years, our technical support and product quality have earned the trust of tier-1 telecom operators and global network integrators. Today, we supply customers in East Asia, Southeast Asia, the Middle East, Eastern Europe, Western Europe, Northern Europe, South America, North America, North Africa, and South Africa.
Our OEM and ODM solutions have won numerous telecom operator tenders and meet rigorous end-user requirements. Our primary terminal telecom clients include: SingTel, Vodafone, America Movil, Telefonica, Bharti Airtel, Orange, Telenor, VimpelCom, TeliaSonera, Saudi Telecom, MTN, Viettel, Bitel, VNPT, Laos Telecom, MYTEL, Telkom, Telekom, Entel, FiberTel, StarFiber, Ooredoo, Beeline, and Azercell.
Answers to common technical queries about 10G SFP+ transceivers and custom network designs.
Complete your deployment with our range of high-performance passive assemblies, patch cords, and next-generation optical interfaces.
KOCENT OPTEC
